T-Slot CleanerScraper for CNCMill by frolen13

Step 3: Drilling and Counter Sinking Mark Hole with center punch and ball pein hammer Collect 6mm drill from store and check Sharpen drill if needed, then

Apprentices make tee slot cleaners from a piece of sheetmetal, tee one end, other end with radius to suit the trough at the end of the

turnament slot I build a T Slot cleaner out of some scrap aluminum round stock for a mill drill

t slot aluminum extrusions I recommend taking a nice sharp mill file and run it along the vertical slot faces I use some fingertips between the file and the opposite side